Spec for spec comparison between the Cambridge Audio CXA61 and the Rega Brio.
CXA61 Specs
POWER OUTPUT
60W RMS into 8 Ohms, 90W RMS into 4 OhmsDAC
ESS Sabre ES9010K2MFREQUENCY RESPONSE
<5Hz– 60kHz +/-1dBANALOGUE AUDIO INPUTS
4 x RCA, 1 x 3.5mm MP3 input (front panel)DIGITAL AUDIO INPUTS
1 x S/PDIF coaxial, 2 x TOSLINK optical, 1 x USB audio, Bluetooth (integrated)COMPATIBILITY
TOSLINK optical: 16/24bit 32-96kHz PCM only, S/PDIF coaxial: 16/24bit 32-192kHz PCM only, USB: audio profile 1.0/2.0 (default 2.0), up to 32bit 384kHz PCM, up to DSD256 or DoP256, Bluetooth: 4.2 A2DP/AVRCP supporting up to aptX HD (24bit 48kHz)BLUETOOTH APTX HD RECEIVER BUILT-IN
YesROON TESTED
YesOUTPUTS
Speakers A+B, 3.5mm Headphone, Preamp Output, Subwoofer OutputREMOTE CONTROL
YesMAX POWER CONSUMPTION
600WSTANDBY POWER CONSUMPTION
<0.5WDIMENSIONS (H X W X D)
115 x 430 x 341mm (4.5 x 16.9 x 13.4”)WEIGHT
8.3kg (18.3lbs)BOX CONTENTS
CXA61 Integrated Amplifier, Power Cable, 3 x AAA Batteries, Remote Control, Control Bus Cable
Rega Brio Specs
Input sensitivities for rated output level:
Input 1 (phono) input sensitivity = 2.1mV at 47KΩ in parallel with 220pF.
Maximum Input 1 (phono) input level = 100mV
Input 2-5 (line) input sensitivity = 210mV at 47kΩ
Maximum input 2-5 (line) input level = 10.25V
Power outputs at 230/115V supply voltage:
50Watts RMS both channels driven into the rated load of 8Ω
58Watts RMS one channel driven into the rated load of 8Ω
73Watts RMS both channels driven into the rated load of 4Ω
93Watts RMS one channel driven into the rated load of 4Ω
Continued high level use into 4Ω may cause the case to exceed 40° C above the ambient temperature.
Headphone output:
No load = 8V
32Ω = 1.8V
54Ω = 2.6V
300Ω = 5.9V
Source impedance = 109Ω
Power consumption:
195Watts at 230V/220V/115V/100V into the rated load of 8Ω
Record output level:
Record output level (with rated input levels) = 210Mv.
Record output impedance = 470Ω
Frequency response:
Phono 15Hz to 40KHz (-3dB Points) / 27Hz to 20.5KHz (-1dB Points)
RIAA accuracy (100Hz to 10KHz) ± 0.4dB typically better than ± 0.3dB
Line 12Hz (-1dB points) to 43KHz (-3dB points)
Remote control batteries included – 2 x AAA Alkaline.
Fuse ratings:
T2AL 250V – 230V/50Hz and 220V/60Hz
T3.15AL 250V – 115V/60Hz and 100V 50/60Hz
Cambridge Audio CXA61 vs Marantz PM 6007
