E-More® Top Quality LKV383 150M 1080P Network HDMI Extender Receiver and Transmitter Over Cat6 cable-HDBitT Extender TX/RX Wireless HDbitT HDMI Extender Supporting IR Signal Transmission

Overview:
LKV383 HDbitT HDMI Extender deliver Full HD 1080P HDMI signal up to 150m, it supports extend and split by network devices, compatiable with existing network, and intellagent auto adjustment to match cable length, IR singnal transmission for control the source device.

Specification:
1. HDMI: HDMI 1.3 Version, compliant with HDCP
2. Resolution: 480i@60HZ, 480P@60HZ, 576i@50HZ, 576P@60HZ, 720P@50/60HZ, 1080i@50/60HZ, 1080P/50/60HZ
3. 100m hdmi extender over CAT5e cable:
– CAT5 cable: max. 100 meters
– CAT5e cable: max. 120 meters
– CAT6 cable: max. 150 meters
– This distance is also compliant for connection by switch/router for distribution.
4. Cable runs can be extended another 120m by adding a Gigabit Ethernet switch
5. Maximum 3 layers of Ethernet switches could be passed through
6. Uses off-the-shelf gigabit IP switches for extension and distribution; and the switch/router can be used to log onto the internet at the same time
7. Follow up standard IEEE-568B protocol
8. IR signal: Supports 20-60KHz IR devices
9. Working temperature: 0-60 degree centigrade
10. Power consumption: TX:3.5W; RX:3W
11. Power Supply: DC 5V1A
12. Dimensions (L x W x H): 96.8x 94 x 23.7(mm)

Note:
1. This extender requires sender and receiver to work at the same time.
2. Do not mix up the HDMI to LAN sender and LAN to HDMI receiver, and the IR blaster and IR receiver.
3. Do not plug-in/out the cables ,when it is in using.
4. Use DC5V power supply only. Make sure specification matched if using adapters not supplied by factory.

Package Contents:
* 1 X E-More LKV383 HDbitT HDMI Extender Sender
* 1 X HDbitT HDMI Extender Receiver
* 1 X IR blaster extension cable
* 1 X IR Receiver extension cable
* 2 X 5V DC Power Supply adapter
* 1 X User Manual