Skip to content
Home » Setup Denon Receiver Without Remote

Setup Denon Receiver Without Remote

  • by
Setup Denon Receiver Without Remote

Complete Guide to setting up your Denon Receiver without the Remote Control

Where is that remote? Sometimes you lose the remote and your favorite show is about to air but you can’t turn on the receiver without the dang remote. So now you find yourself searching for a solution. Hopefully we can help you out.

If you want to setup your Denon receiver without using the remote, there are a few things you’ll need to do. First, you’ll need to find the ‘Setup’ menu. This can usually be found on the main menu, or on the ‘Settings’ menu. Once you’ve found the ‘Setup’ menu, you’ll need to select the ‘Remote’ option.


Once you’ve found the ‘Remote’ option, you’ll need to select the ‘No Remote’ option. This will disable the remote control function on your Denon receiver. You can then proceed to follow the on-screen instructions to setup your Denon receiver without using the remote.

To set up your Denon AV receiver without the remote control, follow these steps:

  1. Locate the front panel controls of the receiver. These are the buttons and controls on the front of the receiver, not on the remote control.
  2. Turn on the receiver by pressing the “Power” button on the front panel.
  3. Press the “Input” button on the front panel to cycle through the available input sources until you reach the desired source.
  4. Press the “Volume Up” button on the front panel to increase the volume. Press the “Volume Down” button to decrease the volume.
  5. Use the arrow buttons on the front panel to navigate through the menu options and select the desired option by pressing the “Enter” button.
  6. Use the arrow buttons to adjust the settings as desired and press the “Enter” button to save your changes.
  7. To exit the menu, press the “Menu” button again or select the “Exit” option from the menu.

Note: The specific front panel controls and menu options available may vary depending on the model and firmware version of your Denon AV receiver. Consult the user manual for your specific model for more detailed information.

It is also worth noting that while it is possible to set up and use your Denon AV receiver without the remote control, the remote control can often make it easier to access and control various features and settings. If you do not have the remote control or if it is lost or damaged, you may be able to purchase a replacement remote or use a universal remote as an alternative.

Here are a few additional points to consider when setting up your Denon AV receiver without the remote control:

  1. Make sure the receiver is powered on: In order to access the front panel controls, the receiver must be powered on. If the receiver is not powered on, you will not be able to access the front panel controls or make any changes to the settings.
  2. Familiarize yourself with the front panel controls: It is important to familiarize yourself with the front panel controls of your Denon AV receiver in order to effectively set it up and use it without the remote control. The specific controls available may vary depending on the model, but common controls include the power button, input selector, volume controls, and menu navigation buttons.
  3. Use the front panel controls to access and adjust the settings: You can use the front panel controls to access and adjust various settings and features of the receiver, such as the audio and video input and output configurations, speaker setup, and network connectivity. Navigate through the menu options using the arrow buttons and select an option by pressing the “Enter” button. You can then use the arrow buttons to adjust the settings as desired and press “Enter” to save your changes.
  4. Consult the user manual for more detailed information: The user manual for your specific model of Denon AV receiver will often have more detailed information on the front panel controls and how to use them to access and adjust the various settings and features of the receiver. Be sure to consult the manual for more detailed instructions.

Again, it is worth noting that while it is possible to set up and use your Denon AV receiver without the remote control, the remote control can often make it easier to access and control various features and settings. If you do not have the remote control or if it is lost or damaged, you may be able to purchase a replacement remote or use a universal remote as an alternative.

How to Connect a Universal Remote to a Denon Receiver

If you had enough and decided to get a universal remote this section is for you or you may be considering getting a universal remote. Here we go.

To connect a universal remote to a Denon receiver, follow these steps:

  1. Turn on your Denon receiver and make sure it is in the correct input mode for the device you want to control (e.g. “TV” for your TV).
  2. Locate the “Code Search” or “Program” button on your universal remote. This button is usually found on the back or underside of the remote, and may be labeled differently depending on the make and model of your remote.
  3. Press and hold the “Code Search” or “Program” button until the indicator light turns on, then release the button.
  4. Press and release the button for the device you want to control (e.g. “TV” for your TV). The indicator light should flash once.
  5. Enter the three-digit code for your Denon receiver using the numeric keys on your universal remote. A list of codes can usually be found in the instruction manual for your universal remote or online.
  6. Press the “Power” button on your universal remote to test the connection. If the receiver turns off, the connection is successful. If it does not, repeat the process and try a different code.
  7. If you are unable to find a code that works, you may need to try a “learning” or “teaching” function on your universal remote. Consult the instruction manual for your remote for more information on how to use this function.

I hope this helps! Let me know if you have any questions.

What are the best universal remotes for a Denon receiver

There are several universal remotes that are compatible with Denon receivers and can provide reliable control. Some popular options include:

  1. Logitech Harmony 650: This universal remote is easy to set up and use, and can control up to 8 devices (including your Denon receiver) with just one remote. It features a color screen that displays commands and can be programmed to control a wide variety of devices, including TVs, Blu-ray players, and more.
  2. One For All URC 7980: This universal remote can control up to 15 devices, including your Denon receiver, and features a backlit keypad for easy use in low light conditions. It can be programmed to control a wide variety of devices, including TVs, DVD players, and more.
  3. RCA RCR504BR: This universal remote can control up to 4 devices, including your Denon receiver, and features a backlit keypad for easy use in low light conditions. It can be programmed to control a wide variety of devices, including TVs, Blu-ray players, and more.
  4. Setup Denon Receiver Without Remote: This universal remote can control up to 8 devices, including your Denon receiver, and features a backlit keypad for easy use in low light conditions. It can be programmed to control a wide variety of devices, including TVs, DVD players, and more.

How to Connect Polk Audio Subwoofer to Denon Receiver

Final

Ultimately, the best universal remote for your Denon receiver will depend on your specific needs and preferences. Consider factors such as the number of devices you want to control, the layout and functionality of the remote, and any additional features (such as a color screen or backlit keypad) that may be useful.