Cambridge Audio CXA61 vs Audiolab 6000a

Cambridge Audio CXA61

CXA61 Specs

POWER OUTPUT

60W RMS into 8 Ohms, 90W RMS into 4 OhmsDAC

ESS Sabre ES9010K2MFREQUENCY RESPONSE

<5Hz– 60kHz +/-1dBANALOGUE AUDIO INPUTS

4 x RCA, 1 x 3.5mm MP3 input (front panel)DIGITAL AUDIO INPUTS

1 x S/PDIF coaxial, 2 x TOSLINK optical, 1 x USB audio, Bluetooth (integrated)COMPATIBILITY

TOSLINK optical: 16/24bit 32-96kHz PCM only, S/PDIF coaxial: 16/24bit 32-192kHz PCM only, USB: audio profile 1.0/2.0 (default 2.0), up to 32bit 384kHz PCM, up to DSD256 or DoP256, Bluetooth: 4.2 A2DP/AVRCP supporting up to aptX HD (24bit 48kHz)BLUETOOTH APTX HD RECEIVER BUILT-IN

YesROON TESTED

YesOUTPUTS

Speakers A+B, 3.5mm Headphone, Preamp Output, Subwoofer OutputREMOTE CONTROL

YesMAX POWER CONSUMPTION

600WSTANDBY POWER CONSUMPTION

<0.5WDIMENSIONS (H X W X D)

115 x 430 x 341mm (4.5 x 16.9 x 13.4”)WEIGHT

8.3kg (18.3lbs)BOX CONTENTS

CXA61 Integrated Amplifier, Power Cable, 3 x AAA Batteries, Remote Control, Control Bus Cable

Audiolab 6000a

6000a Specs

Gain (max.)	+8dB (Line)
	+55dB (Phono MM)
Input Sensitivity	720mV (Line, Volume = 0dB)
	3.1mV (Phono MM, Volume=0dB)
Input Impedance	10K (Line)
	47K//100pF (Phono MM)
Total Harmonic Distortion (THD)	< 0.0004% (Line, 1KHz @ 2V, Volume = 0dB)
Frequency Response	20Hz-20kHz (+/-0.1dB)
Output Voltage	2.3V max. (Volume = 0dB)
Output Impedance	120Ω
Signal-to-Noise Ration (S/N)	> 110dB (Line, A-weighted)
	>76dB (Phono MM, A-weighted)
DAC
D to A converter	ES9018K2M
Total Harmonic Distortion (THD)	< 0.0006% (1kHz @ 0dBFS)
Output level (0dBFS, 1KHz)	2.05V
Max. Sampling Frequency	192kHz
Signal-to-noise ratio (S/N)	> 112dB (A-weighted)
Digital Filters	Fast Roll-off , Slow Roll-off , Minimum Phase
Power Amplifier Section
Gain	+29dB
Rated Max. Power Output	2 X 50W (8Ω, THD<1%)
	2 X 75W (4Ω, THD<1%)
Frequency Response	20Hz-20kHz (+/-0.3dB)
Input Sensitivity	720mV
Total Harmonic Distortion (THD)	<0.003% (1kHz @ 40W/8Ω)
Signal-to-Noise ratio (S/N)	> 110dB (A-weighted)
Max. Output Current	9A
Headphone Amplifier
Total Harmonic Distortion (THD)	< 0.01% (1kHz, 50mW)
Output Impedance	2.35Ω
Load impedance	20-600Ω
General
Standby Power Consumption	<0.5W
Power Requirements	240V ~ 50 – 60Hz
	230V ~ 50 – 60Hz
	115V ~ 50 – 60Hz
	100V ~ 50 – 60Hz
Dimensions (mm) (W x H x D)	445 x 80 x 330mm including feet, terminals and controls
Carton Size (mm) (W x H x D)	512 x 467 x 146
Weight	7.8kg (Net)