When your hometheater equipment stops functioning it can be very frustrating at times. Especially your Onkyo subwoofer.
Check to see whether the subwoofer’s volume has been turned down. Raise the volume on the subwoofer to its maximum level. Check to see that the speaker settings on the television or audio system have been set up correctly so that you can utilize the subwoofer.
Why is there no sound coming from my subwoofer?
If a subwoofer attached to your television isn’t making any sound, try these steps to figure out what’s wrong:
- Make sure that the subwoofer is connected to the audio system’s MIX or SUB output before you turn it on.
- Ensure that the power cord for the subwoofer is connected to a working outlet.
- Make use of the subwoofer by turning it on.
- Keep the subwoofer unmuted.
- Increasing the subwoofer’s volume is necessary.
- To get the most out of your subwoofer, double-check that your TV or audio system’s speaker settings are right.
- IMPORTANT: Certain speaker settings may disable the subwoofer. If this is the case, changing the speaker settings may assist. Consult the owner’s manual for your audio/video equipment or television set for more information.
- Try a different sound field on your stereo receiver if it has multiple sound fields. Due to the good field settings, the subwoofer may have to be disabled. The difficulty may be alleviated by altering the audio environment. See the audio system’s instruction manual for further information.
- Connect the subwoofer to the audio system’s separate MIX or SUB output if it is available.
- Replace the connection cable for the subwoofer.
- If the problem persists after following all troubleshooting methods, servicing is necessary.
How do you fix Onkyo’s no sound?
You want to reset your Onkyo receiver to fix the “no sound” problem, but you’re unsure how. If that’s the case, you’ve come to the right place. Onkyo receivers can be reset by following the methods outlined below.
Step 1: Find the On/Standby and VCR/DVD buttons
By looking at the interface, you can locate the VCR/DVD and On/Standby buttons on your Onkyo receiver. If you’re unable to locate the buttons, consult the owner’s manual.
Step 2: The Buttons Must Be Pressed And Held
Once you’ve located the VCR/DVD and On/Standby buttons, press and hold both for a few seconds. You may put your Onkyo radio into standby mode this way.
Step 3: Toggle the On/Standby switch
To complete the reset, push the On/Standby button once while your Onkyo radio is in Standby mode. Because Onkyo receivers return to the default setting after a reset, you’ll have to set up your presets again.
Alternatives to Onkyo Receivers’ Sound Failures
Look into the Outlet
Like other components of the home entertainment system, the receiver needs electricity to remain operational. That implies that if you put your Onkyo receiver into a poor outlet, it will suffer from disruptions in power flow, lowering its performance.
You should put another device into the socket to see whether it is the source of your Onkyo receiver’s “no sound” issue. If the appliance works well, you may assume that the outlet is in excellent working order. It’s important to fix the outlet as soon as possible if the appliance won’t turn on.Before plugging the receiver back in, you may need to repair or replace the outlet, depending on the scenario.
Check The HDMI Cable
HDMI (High-Definition Multimedia Interface) cables are intended to transport high-quality video and audio signals. The “no sound” warning is one of the repercussions of a problem with the HDMI connection connecting your Onkyo receiver.
It’s unusual for individuals to bring up the HDMI cable during conversations concerning the Onkyo receiver “no sound” reset. Sometimes all that is required to restore sound is to re-secure a loose HDMI cable. Nonetheless, if the HDMI cable seems to be damaged, it is recommended to get a new one. You won’t have to go far to get an HDMI cable for your Onkyo receiver since many hardware shops carry them.
Examine the connection to the source
In general, if the connection between your Onkyo receiver and its sources becomes faulty, the chances of failure increase. Hence, it’s highly advised that you consider the source connection when troubleshooting the “no sound” fault of Onkyo radios. One method of determining the cause of the problem is to test each source (radio, disc players, gaming systems, etc.) separately. When you’ve figured out which one is causing the problem, take your time reconnecting it to your Onkyo radio.
Assess The Speaker’s Wires
Put another way; speaker cables are essential for Onkyo receivers to transmit sound. As a result, if your Onkyo receiver isn’t producing sound, you should check the speaker wiring for evidence of damage. For smooth functioning, ensure sure the wires are in touch with the terminals at all times. Aside from that, if the wires look to be frayed, replace them immediately.
how do I connect my subwoofer to my Onkyo receiver?
When putting up a home entertainment system, it’s easy to get confused trying to figure out what connects to what and how to get the greatest sound.
Things become more difficult when you have a passive subwoofer, which is different from what most people have. Is it possible to hook up a passive subwoofer to a receiver?
One technique to connect a passive subwoofer to an AV receiver is to treat it as a loudspeaker and connect it straight through the speaker connections. As a powered subwoofer, you can connect an external amplifier to the pre-out.
Using an external amplifier when connecting a passive subwoofer to an AV receiver is preferred, and this article will explain why, as well as how to connect these components.
Troubleshooting the subwoofer is the First step
Check out these quick fixes before deciding to replace a subwoofer that appears to be defective (similar to when your audio system stops working). Worst-case scenario, perhaps? You could get the opportunity to go speaker shopping.
Ensure all equipment, including the subwoofer, is switched off before you begin. Always disconnect wires before reconnecting them in order to avoid inflicting harm.
Starting with the subwoofer, check all speaker wires and connections. Inspect to make sure that all wires are connected and inserted in the correct places.
The subwoofer’s inputs are normally connected to the subwoofer output on the rear of receivers or amplifiers. If the subwoofer is linked to the receiver or amplifier’s speaker outputs, check the length of the wire connections for defects. Before attempting to use the item once more, check for damaged or frayed cables and replace them if necessary. Make sure the wires are working by conducting a simple test.
Check the plugs, the cord, and the fuse
Most subwoofers have a “standby” LED that lights to show active power. If the subwoofer isn’t illuminating, make sure it’s securely plugged into a wall socket, surge protector, or power strip.. If the plug’s prongs fall out halfway, gently bend them back in so the cable stays attached when you let go. Do not leave any switch alone, such as those on walls or power strips. When all else fails, try plugging the subwoofer into a different outlet.
Similar to speaker wires, check the power cord of the subwoofer for damage or malfunctions. Remove the rear plate of some subwoofers to access a fuse, which may or may not be necessary. Whether the fuse is a safety feature and you’re experienced with electronics, determine if it needs to be replaced. Otherwise, seek advice from the manufacturer or a local repair shop.
Check the menu and system settings
The menu settings on your receiver or amplifier should be checked even if all the wiring and connections appear to be working properly. Connect the subwoofer to the appropriate audio inputs. The power of your subwoofer may also have been lowered.
As long as you can change your speaker size, go with the smallest option first; sometimes changing the speaker size to anything larger inhibits the subwoofer from getting a signal. Check your receiver’s user manual for more information if you want to use subwoofers with large speakers.
